The mySpot beamline at BESSY II

Ivo Zizak

Abstract


mySpot beamline is used to provide stable beam especially tuned for the mySpot experiment. Depending on the experiment requirements, different optical devices are used. The schematic view shows two different configurations, one tuned for low divergence, and one for narrow energy band width, as required for the scattering and spectroscopy experiments respectively. Since the goal of the experiment is to provide several methods at the same time, beamline properties can be tuned to provide the optimal beam for a given combination of experiments. Total intensity, divergence, energy resolution, high harmonics suppression, and stability in scans can be tuned to match the requirements (Erko & Zizak, 2009).

References


Erko, A., Schäfers, F., Firsov, A., Peatman, W., Eberhardt, W., & Signorato, R. (2004). The BESSY X-ray microfocus beamline project. Spectrochimica Acta Part B: Atomic Spectroscopy, 59(10–11), 1543 - 1548. (17th International Congress on X-Ray Optics and Microanalysis) http://dx.doi.org/10.1016/j.sab.2004.03.015

Erko, A., & Zizak, I. (2009). Hard X-ray micro-spectroscopy at Berliner Elektronenspeicherring für Synchrotronstrahlung II. Spectrochimica Acta Part B: Atomic Spectroscopy, 64(9), 833 - 848. http://dx.doi.org/10.1016/j.sab.2009.07.003


Cite article as: Helmholtz-Zentrum Berlin für Materialien und Energie. (2016). The mySpot beamline at BESSY II. Journal of large-scale research facilities, 2, A102. http://dx.doi.org/10.17815/jlsrf-2-113




DOI: http://dx.doi.org/10.17815/jlsrf-2-113

URN: http://nbn-resolving.de/urn:nbn:de:0001-jlsrf-2-113-1

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.