EVo: Net Shape RTM Production Line

Sven Torstrick, Felix Kruse, Martin Wiedemann

Abstract


EVo research platform is operated by the Center for Lightweight-Production-Technology of the German Aerospace Center in Stade. Its objective is technology demonstration of a fully automated RTM (Resin Transfer Molding) production line for composite parts in large quantities. Process steps include cutting and ply handling, draping, stacking, hot-forming, preform-trimming to net shape, resin injection, curing and demolding.


References


Hindersmann, A. and Exner, W. and Liebers, N. and Opitz, M. and Torstrick, S. and Ucan, H. (2012). Forschungsplattform für endkonturnahe Faserverbund-Bauteile im automatisierten Fertigungsprozess.

In Deutscher Luft- und Raumfahrtkongress 2012. Braunschweig, Deutschland. (DocumentID: 281289)

Grohmann, F., Y. und Zacharias. (2014). Electrical resistsnce heating - a method for binder activation in CFRP processing? In ECCM16 - 16th European Conference on Composite Materials. Sevilla, Spain. (22. - 26. June 2014)

Heuer, H., Schulze, M., Pooch, M., Gäbler, S., Nocke, A., Bardl, G., . . . Petrenz, S. (2015). Review on quality assurance along the {CFRP} value chain – non-destructive testing of fabrics, preforms and {CFRP} by {HF} radio wave techniques. Composites Part B: Engineering, 77, 494 - 501. http://dx.doi.org/10.1016/j.compositesb.2015.03.022


Cite article as: DLR-FA & DLR-ZLP et al. (2016). EVo: Net Shape RTM Production Line. Journal of large-scale research facilities, 2, A66. http://dx.doi.org/10.17815/jlsrf-2-125




DOI: http://dx.doi.org/10.17815/jlsrf-2-125

URN: http://nbn-resolving.de/urn:nbn:de:0001-jlsrf-2-125-6

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.